Re: SNMP Monitoring of a Transfer Switch relay

From: Chris Burwell (no email)
Date: Fri May 14 2010 - 16:12:55 EDT

  • Next message: Jared Mauch: "Re: ipv6 transit over tunneled connection"

    I have used the APC Environmental Manager (EMU) to do this. In our
    case we ran a 4-pair line from the generator to the EMU. One pair was
    connected to the EMU so that we could monitor and alert on the
    run-cycles of the generator. Our transfer switch did not have these
    capabilities, but you could apply the same configuration we used for
    out generator.

    The EMU has built-in alerting as well as the ability to send SNMP traps.

    - Chris

    On Fri, May 14, 2010 at 1:59 PM, Tom Beecher <> wrote:
    > I'm presently doing some research into a SNMP-enabled device to monitor a
    > set of aux contacts on our transfer switch in order to be able to monitor
    > it's status (on generator or on commercial) from our monitoring platform.
    > I've seen a few interesting devices out there that can accomplish this,
    > however I thought I'd query the list to see if anyone has thoughts about a
    > particular unit they've worked with.
    >
    > Thanks in advance,
    >
    > Tom
    >
    >
    >


  • Next message: Jared Mauch: "Re: ipv6 transit over tunneled connection"





    Hosted Email Solutions

    Invaluement Anti-Spam DNSBLs



    Powered By FreeBSD   Powered By FreeBSD