Re: Catalyst 6500 High Switch Proc

From: Jon Lewis (no email)
Date: Sat Nov 15 2008 - 17:23:23 EST

  • Next message: Frank Bulk: "RE: hosted PBX/VOIP thru VPN?"

    On Sat, 15 Nov 2008, Philip L. wrote:

    > This is on a Sup720-3BXL by the way:
    >
    > 'sh mls netflow table-con detailed:'
    > Earl in Module 5
    > Detailed Netflow CAM (TCAM and ICAM) Utilization
    > ================================================
    > TCAM Utilization : 100%
    > ICAM Utilization : 6%
    > Netflow TCAM count : 262024
    > Netflow ICAM count : 8
    > Netflow Creation Failures : 2085847
    > Netflow CAM aliases : 0

    This looks like the same issue I ran into not long ago. Switch your
    netflow over from full to sampled...you lose lots of data, but your
    hardware can't handle full netflow for your traffic level.

    AFAIK, your only other options are to mess with the mls aging timers
    (shorten them) or buy cards with DFC and hope that gets you enough
    additional netflow capacity for the interfaces your collecting.

    http://www.gossamer-threads.com/lists/cisco/nsp/94953

    ----------------------------------------------------------------------
      Jon Lewis | I route
      Senior Network Engineer | therefore you are
      Atlantic Net |
    _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________


  • Next message: Frank Bulk: "RE: hosted PBX/VOIP thru VPN?"





    Hosted Email Solutions

    Invaluement Anti-Spam DNSBLs



    Powered By FreeBSD   Powered By FreeBSD