RE: Assigning IPv6 /48's to CPE's?

(no email)
Date: Mon Jan 07 2008 - 17:05:12 EST

  • Next message: Scott Weeks: "Re: Assigning IPv6 /48's to CPE's?"

    > Asking for practical advice on choosing /48 vs. /56 on a
    > residential broadband CPE is largely unanswerable.
    > Because I don't know of any residential broadband CPEs that
    > support IPv6.

    If you go to
    http://www.getipv6.info/index.php/IPv6_Presentations_and_Documents
    there is at least one presentation from Comcast, a residential
    broadband provider who explained that they simply cannot continue
    in business without IPv6. They started IPv6 deployment planning
    in 2005. If you don't know of CPE that supports IPv6, maybe you
    should ask a broadband ISP that is serious about surviving in business
    past the crunch of 2010.

    > I want to be wrong about that. Seriously. Send me a link to
    > one. I want to be wrong. (And by residential, I mean a
    > CPE/router/firewall that costs less than $150US.)

    http://wiki.openwrt.org/IPv6_howto
    Clearly, this CPE is based on Linux which has had full IPv6 support
    for many years, including things like firewalling, transition mechanisms
    like 6to4, DNS and so on. Given the realities of today's low-end network
    device manufacturing (centered in China where IPv6 is already being
    deployed, and based on standard hardware designs that are differentiated
    by software, plastic case design, and packaging) it should take about
    two months from time of order for mass quantities of CPE devices to
    appear on the market. The software is already done, the standard
    hardware
    designs are fully capable of IPv6. All they are waiting for is customers
    like Linksys to place an order.

    > IMO, the only answers so far:
    > businesses get /48
    > dialup gets /64

    Wrong!
    The answer so far is that EVERYBODY gets a /48, but if you think that
    there is a risk that you won't be able to get additional /32s when you
    outgrow your first allocation, then give a /56 to RESIDENTIAL SITES.
    This is not the same as dialup, i.e. residential sites could be
    connected
    with DSL, T1s, wireless, or whatever. In fact, if a business is
    connected
    via dialup, you should give them a /48, because businesses have a habit
    of
    continuous growth, unlike residences which tend to top out at 5 or 6
    residents.

    --Michael Dillon


  • Next message: Scott Weeks: "Re: Assigning IPv6 /48's to CPE's?"





    Hosted Email Solutions

    Invaluement Anti-Spam DNSBLs



    Powered By FreeBSD   Powered By FreeBSD