RE: Cyrus Installaion Problems

From: Harsimran Hansrai (no email)
Date: Mon Sep 09 2002 - 20:59:44 EDT


Paul,

I tried that as well, but when I run the command /usr/cyrus/bin/master &
and then issue a ps -aux | grep cyrus command I get the following:
[1]+ Exit 78 /usr/cyrus/bin/master
and the process just quits.

I also tried starting the master process by ./master and it just drops me
to the command prompt # without any messages.

Thanks,
Simran

On Mon, 9 Sep 2002, Schmehl, Paul L wrote:

> OK. You have to get the Cyrus process going before you can use imtest
> or the other utilities to test it. I don't know where you installed
> Cyrus, but if it's in the default location from a source install, it
> will be in /usr/cyrus/bin/. If that's where it is, you start it like
> this:
> /usr/cyrus/bin/master &
>
> The "&" is important. Otherwise the process will run in the foreground,
> and you won't be able to do anything else. You can set up Cyrus to run
> on startup by putting the above line in the /etc/rc.local file. Make
> sure you add the "&" so it will run in the background.
>
> Once you have Cyrus started, then try imtest and see if you can connect
> successfully.
>
> Paul Schmehl ()
> Department Coordinator
> The University of Texas at Dallas
> AVIEN Founding Member
> http://www.utdallas.edu/~pauls/
>
>
> > -----Original Message-----
> > From: Harsimran Hansrai [mailto:]
> > Sent: Monday, September 09, 2002 4:11 PM
> > To: Schmehl, Paul L
> > Cc: Harsimran Hansrai;
> > Subject: RE: Cyrus Installaion Problems
> >
> >
> > Hi Paul,
> >
> > I do not get any processes running for cyrus when I do ps -aux | grep
> > cyrus. I just get
> > root 31540 0.0 0.4 1700 604 pts/8 S 14:09
> > 0:00 grep cyrus
>








Hosted Email Solutions

Invaluement Anti-Spam DNSBLs



Powered By FreeBSD   Powered By FreeBSD